
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X15-20B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 15mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X15-20B is a double-acting JIS compact cylinder featuring a male-thread piston rod end (M14x1.5) that couples directly to your load. An external threaded stop with a lock nut limits the extend end position, providing a usable extend range of 0-15 mm (15 mm full stroke minus the 20 mm adjustment window). The retract stroke remains completely unaffected.
The cylinder body uses a fixed elastomer NBR bumper at each end for end-of-stroke deceleration and includes sensor grooves, though this specific configuration ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X15-20B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 15 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping extension on a CNC machining center during setup, allowing operators to fine-tune the 0-15 mm end position without swapping cylinder bodies.
Adjust the extend stop rapidly on a packaging line when switching between carton sizes, using the external M12x1.25 adjuster to set new end limits on the fly.
Test various extend endpoints on assembly machinery to find the optimal pressing distance, relying on the 82 kgf maximum push force to move the load.
If your application requires a fixed 15 mm extend stroke without on-the-fly adjustments, a standard ACQ32X15 cylinder will suffice. When ordering this adjustable version, confirm the 32 mm bore, 15 mm full stroke, 20 mm window, the male rod thread (-B), and whether you require the -S magnet option for position sensing.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The usable extend range is 0-15 mm (15 mm full stroke minus the 20 mm window), while the retract stroke remains unaffected.
The external M12x1.25 threaded stop with a lock nut limits the extend stroke length only; it does not change the piston area or force. The cylinder uses a fixed elastomer NBR bumper at each end for deceleration rather than an adjustable air cushion. Note that this model ships without a sensor magnet, though the body retains sensor grooves for adding switches if needed.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.