
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X150-50 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 150mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The ACQJ32X150-50 is a double-acting JIS compact cylinder with a 32mm bore and a 150mm made-to-order long stroke, exceeding the standard 100mm maximum for this bore size. An external M12x1.25 threaded stop and lock nut limits the extend end position, providing a usable extend range of 100 to 150mm without changing parts. The retract stroke remains unaffected.
The body features a PT1/8 port, a 16mm rod with a female M8x1.25 thread, fixed NBR elastomer bumpers at both ends, and magnetic-switch grooves. This unit ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X150-50 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 150 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in exact extend end positions between 100 and 150mm on CNC machining fixtures without machining new spacer blocks.
Rapidly reconfigure extend limits on an assembly line when switching between product variants of different depths.
Safely test trial extend positions on new packaging equipment by limiting the stroke during initial commissioning.
A fixed-stroke ACQ is sufficient if your extend end position never needs adjustment. Confirm your ordering essentials: 32mm bore, 150mm full stroke, 50mm adjuster window, female rod thread, and whether you need the S magnet option for electronic or reed sensors.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
This long-stroke cylinder has a 32mm bore, a 150mm full stroke, and a 50mm adjustment window, giving a usable extend range of 100-150mm.
The external M12x1.25 threaded stop with lock nut limits only the extend stroke length; it does not change piston area, so force remains identical to a standard ACQ. Deceleration relies on fixed NBR elastomer bumpers at each end, not an adjustable air cushion. Note that a plain cylinder does not hold its load on air loss, so an external rod lock is needed for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.