
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X175-50B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 175mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X175-50B is a double-acting, double-rod JIS compact cylinder built for made-to-order long-stroke applications. It features an external M12x1.25 threaded stop with a lock nut on the rod-end side, allowing you to fine-tune the extend end position directly on the machine. The usable extend range spans 125-175 mm, shortening the full 175 mm stroke by up to 50 mm without swapping parts. The retract stroke remains completely unaffected.
This variant includes a male M14x1.5 piston rod end (-B) for direct load coupling and uses a PT1/8 port. It operates at 30-500 mm/s within a -20 to +70 C environment. The body incorporates fixed NBR elastomer bumpers at both ends for end-of-stroke deceleration rather than adjustable air cushions. While shipping without a magnet, the cylinder body retains sensor grooves for adding external reed or solid-state switches if needed later.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X175-50B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 175 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Adjust the extend position from 125 to 175 mm on CNC machining centers to accommodate varying raw material lengths without fabricating new hard stops.
Fine-tune the extend stroke on packaging conveyor diverter arms during product format changes, ensuring precise routing without mechanical rebuilds.
Utilize the 175 mm extended reach for clamping large workpieces or fixtures, tweaking the final clamping position on the fly via the external lock nut.
Note that the 175 mm stroke exceeds the standard 100 mm maximum for this bore, making this a long-stroke, made-to-order variant. If on-site extend tuning is unnecessary, a fixed-stroke ACQ cylinder will suffice. When ordering, confirm the 32 mm bore, 175 mm full stroke, 50 mm adjustable window, male M14x1.5 rod thread, and the absence of a magnet.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The full stroke is 175 mm, but the external adjuster allows you to shorten the extend stroke by up to 50 mm, giving a usable extend range of 125-175 mm.
The external M12x1.25 threaded stop limits only the extend stroke; force remains identical to a standard ACQ because the piston area is unchanged. The cylinder uses fixed elastomer bumpers, not adjustable air cushions. Note that a plain ACQ-type cylinder will not hold its load on air loss, so an external rod lock or pilot-operated check valve is recommended for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.