Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-10B
The AirTAC Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-10B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 200mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ32 mm
- Full stroke200 mm
- Port sizePT1/8
- Adjuster threadM12×1.25
About the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-10B
The ACQJ32X200-10B is a double-acting, single-rod JIS compact cylinder featuring a 32mm bore and a 200mm full stroke. As a long-stroke variant exceeding the 100mm standard maximum for this bore size, it is produced as a made-to-order unit. An external threaded stop with a lock nut limits the extend end position, allowing you to fine-tune the usable extend range from 190mm up to 200mm directly on the machine without changing parts. The retract stroke remains unaffected.
Because the piston area is unchanged, the force output is identical to a standard ACQ of the same bore, delivering a push of 402.1N and pull of 301.6N at 0.5MPa. This unit includes a male rod-end thread (M14x1.5) for direct load coupling and PT1/8 ports. It relies on a fixed NBR elastomer bumper at each end for deceleration rather than an adjustable air cushion. Please note this configuration ships without a magnet.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-10B Technical Specifications
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-10B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 200 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-10B
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-10B Is Used
Machining Fixture Tuning
Dial in the exact 190-200mm extend position on a CNC machining fixture during part-changeover without machining new stop spacers.
Transfer Line Diverter
Adjust the extend stop on a package diverting gate to handle varying box sizes on the fly while maintaining full retract distance.
Carton Sealing Clamp
Set precise end positions for a sealing clamp head during product trials, ensuring consistent pressure without reprogramming the PLC.
Is the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-10B the Right Cylinder?
When sizing this actuator, a 25mm bore yields 245.4N push at 0.5MPa, whereas stepping up to a 40mm bore provides 628.3N. If your extend position never varies, a fixed-stroke ACQ cylinder suffices. To order this adjustable model, confirm the 32mm bore, 200mm full stroke, 10mm window, male rod thread, and whether you require a magnet for sensors.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-10B FAQ
It provides a push force of 402.1N and a pull force of 301.6N at 0.5MPa, and 562.9N push at 0.7MPa, with a maximum push of 82kgf at 1.0MPa. The full stroke is 200mm, and the adjustable window is 10mm, giving a usable extend range of 190-200mm.
An external M12x1.25 threaded stop with a lock nut limits the extend stroke, shortening it by up to 10mm without changing the piston area, so force remains identical to a standard ACQ. Deceleration is handled by a fixed NBR elastomer bumper at each end, not an adjustable air cushion, and this specific model ships without a sensor magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.