Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-10SB
The AirTAC Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-10SB is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 200mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ32 mm
- Full stroke200 mm
- Port sizePT1/8
- Adjuster threadM12×1.25
About the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-10SB
The AirTAC ACQJ32X200-10SB is a double-acting, single-rod JIS compact cylinder with a 200mm stroke that exceeds the standard 100mm maximum for this bore, making it a long-stroke, made-to-order variant. An external M12x1.25 threaded stop and lock nut restricts the extend end position, giving a usable forward range of 190-200mm. The retract stroke remains completely unaffected.
Because the piston area is unchanged, output force is identical to a standard ACQ of the same bore. The unit provides 402.1N push and 301.6N pull at 0.5MPa. It includes a built-in piston magnet compatible with reed or solid-state switches, a male M14x1.5 rod-end thread, and fixed elastomer bumpers at both ends.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-10SB Technical Specifications
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-10SB |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 200 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-10SB
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-10SB Is Used
Fixture Positioning
Dial in exact clamping reach on machining fixtures without swapping out cylinder hardware.
Product Changeover
Adapt extend end stops rapidly during packaging line format changes for varying carton dimensions.
Prototype Testing
Establish optimal end positions on trial assembly rigs by adjusting the external stop nut.
Is the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-10SB the Right Cylinder?
When sizing this actuator, consider the 402.1N push force at 0.5MPa. A smaller 25mm bore yields 245.4N push, while stepping up to a 40mm bore provides 628.3N. If your machinery requires a fixed 200mm reach without on-site adjustment, a standard ACQ32X200 is sufficient. To order, confirm the 32mm bore, 200mm full stroke, 10mm adjuster window, and the S magnet and B male-thread options.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-10SB FAQ
The usable extend range is 190-200mm (200mm full stroke minus the 10mm window). Force is identical to a standard ACQ: 402.1N push and 301.6N pull at 0.5MPa, 562.9N push at 0.7MPa, and 82kgf max push at 1.0MPa. The retract stroke is unaffected.
An external M12x1.25 threaded stop with a lock nut limits the extend stroke, changing the forward length only without altering piston area or force. The cylinder uses fixed elastomer bumpers at each end for deceleration rather than adjustable air cushions. The included -S magnet works with reed or solid-state switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X200-10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.