
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X25-20B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 25mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X25-20B is a double-acting JIS compact cylinder with a 32mm bore and a 25mm full stroke. An external M12x1.25 threaded stop and lock nut restricts the extend end position, yielding a usable extend range of 5 to 25mm. You can dial in the exact endpoint directly on the machine without machining new components. The retract stroke remains completely unaffected.
The unit relies on a fixed NBR elastomer bumper at each end for deceleration rather than an adjustable air cushion. It features a PT1/8 port, a 16mm rod, and a male M14x1.5 rod-end thread (-B) for direct load coupling. Note this variant ships without a magnet, though the body retains sensor grooves for optional switches.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X25-20B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 25 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the clamping reach on a milling fixture to accommodate raw castings of varying widths without fabricating custom spacer blocks.
Rapidly reset the extend end stop during product format changes on a cartoner, ensuring the sealing jaw hits the correct carton depth.
Establish precise press-in depths for bearing inserts on a manual assembly line, tweaking the 5-25mm window until the fit is perfect.
If you require a fixed 25mm extend position and do not need on-the-fly adjustment, a standard ACQ32X25 will suffice. To order this adjustable version correctly, confirm the 32mm bore, 25mm full stroke, 20mm window, male rod thread (-B), and that no magnet is required.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The full stroke is 25mm with a 20mm window, allowing an adjustable extend range of 5 to 25mm.
The external M12x1.25 threaded stop with lock nut mechanically limits how far the rod extends, leaving retract travel untouched. It does not alter piston area, so force remains identical to a standard ACQ32. The cylinder uses fixed elastomer bumpers, not a brake, so it will drift and drop the load on air loss; use an external rod lock for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.