
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X25-30S is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 25mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X25-30S is a double-acting JIS compact cylinder with an external threaded stop and lock nut that limits the extend end position. You can fine-tune the usable extend range from 0 to 25 mm directly on your machinery without swapping parts, while the retract stroke remains completely unaffected. The adjuster mechanism alters stroke length only, so output force stays identical to a standard ACQ of the same bore.
Featuring a 32 mm bore and a 16 mm piston rod, this unit pushes with 402.1 N and pulls with 301.6 N at 0.5 MPa. It incorporates fixed elastomer bumpers at both ends for end-of-stroke deceleration rather than adjustable air cushions. The -S magnet option enables position detection using either reed or solid-state electronic switches, and the PT1/8 port ensures reliable pneumatic connection.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X25-30S |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 25 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the extend stop on machining fixtures to accommodate varying raw material thicknesses without manufacturing new spacer blocks.
Adjust the extend endpoint on packaging lines during product format changeovers to set precise sealing head heights on the fly.
Establish trial end positions for pressing operations during initial machine setup, locking the M12x1.25 adjuster nut once the optimal depth is found.
When sizing this cylinder, consider the 25 mm bore neighbour below (188.9 N pull at 0.5 MPa) or the 40 mm bore above (527.8 N pull at 0.5 MPa) if your force margins are tight. If your application requires a fixed extend length and no on-machine adjustability, a standard ACQ32 cylinder is sufficient. To order this adjustable version correctly, confirm the 32 mm bore, 25 mm full stroke, 30 mm adjustment window, -S magnet option, and the default female M8x1.25 rod-end thread.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The 30 mm adjustment window allows a usable extend range of 0 to 25 mm, while the retract stroke remains fixed.
The external M12x1.25 threaded stop limits the extend stroke but does not change the piston area, meaning force output is identical to a standard ACQ. End-of-stroke damping is handled by fixed NBR elastomer bumpers at both ends, not adjustable air cushions, so external shock absorbers are recommended for high-energy loads.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.