
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X250-30 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 250mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The ACQJ32X250-30 is a double-acting JIS compact cylinder with an external threaded stop and lock nut that limits the extend end position. You can fine-tune the usable extend travel from 220mm up to the full 250mm directly on the machine, while the retract stroke remains completely unaffected. Because the adjuster only alters stroke length and not piston area, the output force matches a standard ACQ of the same bore exactly.
This long-stroke made-to-order variant supplies a 250mm travel for a 32mm bore, exceeding the 100mm standard maximum. It features a 16mm piston rod, a PT1/8 port, and fixed NBR elastomer bumpers at both ends for end-of-travel deceleration. The body includes magnetic-switch grooves, though this specific configuration ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X250-30 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 250 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×250 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the extend position from 220 to 250mm on a CNC fixture to accommodate varying raw part lengths without machining new stop collars.
Rapidly reposition the extend end-stop during packaging line format changeovers to handle different box widths on the fly.
Iteratively test and set the exact end-of-stroke contact point on a stamping press during initial tool setup using the external lock nut.
A standard fixed-stroke ACQ32 is adequate if your end position never requires shifting. When ordering this unit, verify the 32mm bore, 250mm full stroke, 30mm adjustment window, female M8x1.25 rod thread, and confirm whether a -S magnet is needed for sensing.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The full stroke is 250mm with a 30mm adjustment window, yielding a usable extend range of 220-250mm. Retract travel stays fixed.
An external M12x1.25 threaded stop with a lock nut limits the extend stroke, leaving force unchanged from a standard ACQ. Fixed NBR bumpers decelerate the piston at travel ends, but a plain cylinder drifts on air loss, so add an external rod lock for fail-safe load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.