
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X250-40 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 250mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The ACQJ32X250-40 is a double-acting JIS compact cylinder built for applications requiring a 250 mm stroke with on-machine end-position tuning. An external M12x1.25 threaded stop and lock nut limits the extend travel, providing a usable forward range of 210 to 250 mm. The retract stroke remains completely unaffected by this adjustment. As a long-stroke made-to-order variant, it exceeds the standard 100 mm maximum for this 32 mm bore size while retaining the compact body profile.
Because the adjuster solely restricts forward travel length, the internal piston area stays the same. The unit relies on a fixed NBR elastomer bumper at each end for end-of-stroke deceleration rather than an adjustable air cushion, and the body features magnetic-switch grooves for adding sensors later.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X250-40 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 250 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×250 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the extend stop from 210 to 250 mm during CNC fixture swaps without machining new spacer blocks.
Tune the pusher rod end position on-site to handle varying carton depths on a packaging conveyor.
Adjust the sensing probe extension on a palletizing station to clear different pallet load heights.
If the exact 250 mm forward reach is never modified, a fixed-stroke ACQ cylinder suffices. When ordering this adjustable variant, confirm the 250 mm full stroke, the 40 mm window, the female M8x1.25 rod-end thread, and the PT1/8 port. Note that this configuration ships without a magnet.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The usable extend range is 210 to 250 mm, achieved via a 40 mm adjustment window on a 250 mm full stroke.
The external M12x1.25 threaded stop with lock nut physically limits forward travel without altering piston area, so force remains identical to a standard ACQ. Deceleration relies on a fixed elastomer bumper, not an adjustable air cushion. A plain cylinder does not hold its load on air loss, so use an external rod lock for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.