
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X250-75B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 250mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X250-75B is a double-acting, JIS compact cylinder configured for specialized long-stroke applications. It provides a full 250mm stroke, operating as a made-to-order variant since it exceeds the standard 100mm maximum for a 32mm bore. An external M12x1.25 threaded stop and lock nut restricts forward travel, yielding a usable extend range of 175 to 250mm. The return stroke remains completely unaffected.
This unit includes a male M14x1.5 piston rod end for direct coupling. It relies on fixed NBR elastomer bumpers for end-of-stroke deceleration rather than adjustable pneumatic cushions. While sensor grooves are integrated into the body, this specific configuration ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X250-75B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 250 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×250 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in exact extend endpoints from 175 to 250mm on machining centers when swapping out production fixtures.
Modify the pusher extension distance on packaging lines to accommodate cartons of varying depths.
Establish optimal trial stop points for testing assembly probes without machining custom spacer rings.
If your setup never requires altering the end position, a fixed-stroke ACQ cylinder is sufficient. When ordering, verify the 32mm bore, 250mm full stroke, 75mm adjuster window, the male rod thread, and confirm that no internal magnet is required.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
Maximum push is 82kgf at 1.0MPa. The full stroke is 250mm, and the external stop allows the extend length to be shortened within a 175-250mm usable range.
The external M12x1.25 threaded stop limits extension distance without changing the piston area, so force remains identical to a standard ACQ. Fixed NBR elastomer bumpers absorb end-impact energy. Because it lacks a magnet and a rod lock, the cylinder will drift if air pressure is lost; use an external lock for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.