Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X35-40S
The AirTAC Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X35-40S is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 35mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ32 mm
- Full stroke35 mm
- Port sizePT1/8
- Adjuster threadM12×1.25
About the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X35-40S
The ACQJ32X35-40S is a double-acting JIS compact cylinder with an external threaded stop and lock nut that limits the extend end position. You get a 0-35 mm usable extend range (35 mm full stroke minus the 40 mm window) without changing parts. The retract stroke remains unaffected.
Because the piston area stays the same, the output force is identical to a standard ACQ of this bore: 402.1 N push and 301.6 N pull at 0.5 MPa. The 32 mm bore uses a PT1/8 port, a 16 mm rod, and fixed NBR elastomer bumpers at each end. The -S magnet works with reed or solid-state switches.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X35-40S Technical Specifications
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X35-40S |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 35 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X35-40S
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X35-40S Is Used
Machining Fixture Stops
Dial in the extend position from 0 to 35 mm on a CNC lathe loader without machining new stop collars.
Product Changeover Guides
Shift the extend endpoint up to 40 mm during packaging line format changes to accommodate different carton widths.
Prototype End Positions
Test various extend endpoints on a lab assembly rig to find the exact 32 mm bore push location before finalizing the mechanical design.
Is the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X35-40S the Right Cylinder?
If you need less force, the 25 mm bore delivers 245.4 N push @0.5 MPa, while the 40 mm bore gives 628.3 N push @0.5 MPa for heavier loads. Choose this adjustable model only if your end position requires on-the-fly tuning; a fixed-stroke ACQ suffices for static stops. Confirm your ordering code with the 32 mm bore, 35 mm full stroke, 40 mm window, -S magnet, and female M8x1.25 rod thread.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X35-40S FAQ
It delivers 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. The usable extend range is 0-35 mm via a 40 mm window. It uses a PT1/8 port, a 16 mm rod, and an M12x1.25 external adjuster thread.
No, the external stop only changes the extend length, so force remains identical to a standard ACQ. Deceleration relies on fixed NBR elastomer bumpers, not adjustable air cushions. Note that a plain compact cylinder will not hold a load if air pressure drops; use an external rod lock for fail-safe holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X35-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.