Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X35-40SB
The AirTAC Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X35-40SB is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 35mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ32 mm
- Full stroke35 mm
- Port sizePT1/8
- Adjuster threadM12×1.25
About the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X35-40SB
The AirTAC ACQJ32X35-40SB is a double-acting JIS compact cylinder featuring a 32mm bore and a 35mm full stroke. An external M12x1.25 threaded stop with a lock nut limits the extend end position, providing a usable extend range of 0-35mm. The retract stroke remains completely unaffected by this adjustment. Because the piston area is unchanged, output force equals a standard ACQ of this bore.
This model includes a male M14x1.5 piston rod end for direct load coupling and a built-in magnet (-S) for position sensing. It uses a PT1/8 port and fixed NBR elastomer bumpers at both ends for end-of-stroke deceleration. Operating pressure ranges from 0.15 to 1.0 MPa, with a speed range of 30-500 mm/s.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X35-40SB Technical Specifications
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X35-40SB |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 35 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X35-40SB
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X35-40SB Is Used
Machining Fixture Stops
Dial in the exact extend position of a 32mm bore clamping arm on a CNC machining center during product-changeover without machining new spacers.
Packaging Tamping Heads
Adjust the downward push depth of a tamping mechanism on a packaging line to settle different carton fill volumes precisely on the machine.
Assembly Press Trial
Set trial end positions for a press pin insertion tool, tweaking the 0-35mm extend range on-site to find the optimal seating force without reprogramming.
Is the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X35-40SB the Right Cylinder?
If sizing down, the 25mm bore yields 245.4N push at 0.5MPa, while sizing up to the 40mm bore provides 628.3N push. This 32mm bore delivers 402.1N push and 301.6N pull at 0.5MPa. Choose this adjustable unit when setup-varying fixtures require exact extend tuning without swapping parts; if a fixed end position is sufficient, a standard ACQ cylinder suffices. Confirm ordering essentials: 32mm bore, 35mm full stroke, 40mm window, magnet, and male rod thread.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X35-40SB FAQ
The usable extend range is 0-35mm (full 35mm stroke minus the 40mm window). Force is identical to a standard ACQ: push is 402.1N and pull is 301.6N at 0.5MPa, push is 562.9N at 0.7MPa, and max push is 82kgf at 1.0MPa.
The external M12x1.25 threaded stop with lock nut limits only the extend stroke length; it does not change piston area or force. The cylinder uses fixed NBR elastomer bumpers, not adjustable air cushions. The included -S magnet works with both reed and electronic solid-state switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X35-40SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.