
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X40-20S is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 40mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X40-20S is a JIS compact, double-acting double-rod cylinder featuring an external extend stop. A threaded adjuster with an M12x1.25 lock nut lets you set the extend end position on the machine, yielding a usable extend range of 20-40mm from the 40mm full stroke. The retract stroke remains completely unaffected.
The unit includes a -S piston magnet compatible with reed or solid-state switches, fixed NBR elastomer bumpers at both ends, a 16mm rod, and PT1/8 ports.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X40-20S |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 40 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on a CNC machining fixture during product-changeover, using the external stop to adapt travel for different part heights instantly.
Fine-tune the flap tamping end position on packaging lines to accommodate various carton profiles without replacing the cylinder or altering retraction.
Establish trial end positions on an assembly press, tweaking the extend stroke within the 20-40mm window to guarantee precise component seating depths.
Choose this 32mm adjustable model when setup-varying fixtures require trial end positions without swapping parts. For fixed travel needs, a standard ACQ32 cylinder suffices. When ordering, confirm the 32mm bore, 40mm full stroke, 20mm window, -S magnet, and female M8x1.25 rod thread.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
This 32mm bore cylinder has a 40mm full stroke with a 20mm adjustable window, giving a usable extend range of 20-40mm.
The external M12x1.25 threaded stop with lock nut limits only the extend stroke length, leaving retract unaffected. It does not change piston area, so force remains unchanged. Deceleration relies on fixed NBR elastomer bumpers, not adjustable air cushions. The built-in -S magnet works with reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.