Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X45-50SB
The AirTAC Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X45-50SB is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 45mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ32 mm
- Full stroke45 mm
- Port sizePT1/8
- Adjuster threadM12×1.25
About the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X45-50SB
The AirTAC ACQJ32X45-50SB is a double-acting JIS compact cylinder with an external threaded stop and lock nut that limits the extend end position. It provides a usable extend range of 0-45 mm from a 45 mm full stroke, while the retract stroke remains unaffected. The adjuster uses an M12x1.25 thread for precise on-machine tuning without changing parts.
Because the piston area stays the same, force is identical to a standard ACQ of this bore. You get 402.1 N push and 301.6 N pull at 0.5 MPa. This 32 mm bore unit includes a male M14x1.5 rod end thread, a built-in magnet for electronic or reed switches, and fixed NBR elastomer bumpers at each end.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X45-50SB Technical Specifications
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X45-50SB |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 45 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X45-50SB
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X45-50SB Is Used
Machining Fixture Stops
Dial in the exact extend end position for varying part sizes on a milling fixture without swapping physical spacers.
Packaging Changeover
Quickly reposition the extend stroke limit during product format changes on a carton sealing machine.
Prototype Testing Jigs
Trial different end positions on a test rig by turning the external M12x1.25 stopper screw to find optimal kinematics.
Is the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X45-50SB the Right Cylinder?
Choosing this 32 mm bore model gives 402.1 N push at 0.5 MPa. If you need less force, the 25 mm bore yields 245.4 N push, whereas stepping up to the 40 mm bore provides 628.3 N push. A fixed-stroke ACQ cylinder is sufficient if your extend end position never requires adjustment. Confirm your ordering essentials: 32 mm bore, 45 mm full stroke, 50 mm adjuster window, -S magnet, and -B male rod thread.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X45-50SB FAQ
The usable extend range is 0-45 mm from a 45 mm full stroke with a 50 mm adjustment window. Force is identical to a standard ACQ: 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa.
An external M12x1.25 threaded stop with a lock nut limits the extend stroke length, leaving the retract stroke unaffected. The cylinder uses fixed NBR elastomer bumpers at each end for deceleration. The -S built-in magnet works with reed or solid-state switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X45-50SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.