Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X5-10SB
The AirTAC Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X5-10SB is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 5mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ32 mm
- Full stroke5 mm
- Port sizePT1/8
- Adjuster threadM12×1.25
About the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X5-10SB
The AirTAC ACQJ32X5-10SB is a double-acting JIS compact cylinder with an external threaded stop and lock nut that limits the extend end position. It provides a usable extend range of 0-5 mm from a 5 mm full stroke, while the retract stroke remains unaffected. The piston area is unchanged, so output force stays identical to a standard ACQ of the same bore.
This unit includes a male M14x1.5 rod-end thread for direct load coupling and a PT1/8 port. It features fixed NBR elastomer bumpers at both ends rather than adjustable air cushions. Equipped with a piston magnet (-S), it supports both reed and solid-state electronic switches for position sensing.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X5-10SB Technical Specifications
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X5-10SB |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 5 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X5-10SB
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×5 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X5-10SB Is Used
Short-Stroke Clamping
Dial in the exact 0-5 mm clamping extension on machining fixtures to accommodate varying part tolerances without swapping hardware.
Product Changeover Stops
Rapidly adjust the extend end position on packaging lines during format changes, saving setup time when switching between different carton sizes.
Trial End Positions
Fine-tune the extend limit on assembly pick-and-place units to establish the ideal insertion depth for delicate electronic components.
Is the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X5-10SB the Right Cylinder?
For lower force requirements, a 25 mm bore provides 245.4 N push at 0.5 MPa, whereas stepping up to a 40 mm bore yields 628.3 N. If your machine never requires end-position tuning, a fixed-stroke ACQ cylinder is sufficient. To order this adjustable version, confirm the 32 mm bore, 5 mm full stroke, 10 mm window, magnet, and male rod thread.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X5-10SB FAQ
It delivers 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. The 10 mm adjustable window on the 5 mm full stroke provides a usable extend range of 0-5 mm.
An external M12x1.25 threaded stop with a lock nut mechanically limits the extend length, meaning force remains identical to a standard ACQ. The cylinder uses fixed elastomer bumpers, not air cushions, and does not hold its load on air loss; use an external rod lock for fail-safe holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X5-10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.