
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X50-30B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 50mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X50-30B is a double-acting JIS compact cylinder with an external threaded stop and lock nut that limits the extend end position. You can fine-tune the usable extend stroke on the machine from 20 mm up to the full 50 mm without changing parts, while the retract stroke remains unaffected. It features a 32 mm bore, a PT1/8 port, and a male M14x1.5 rod end that couples directly to your load.
Because the adjuster only changes stroke length and not the piston area, the output force stays identical to a standard ACQ of this bore. It uses fixed NBR elastomer bumpers at both ends for end-of-stroke deceleration rather than an adjustable air cushion.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X50-30B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 50 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on a CNC machining center during setup, accommodating varying part heights without machining custom spacers.
Rapidly adjust the extend end position on a packaging line when switching between different carton sizes, using the external stop to set new reject or pusher limits.
Establish trial end positions for pressing operations on an automated assembly line, allowing operators to tweak the 20 to 50 mm extend depth safely before finalizing the cycle.
This 32 mm bore hits a solid middle ground for mid-range actuation. If your end position never varies, a fixed-stroke ACQ cylinder is simpler and sufficient. When ordering this adjustable variant, confirm the 50 mm full stroke, the 30 mm adjustment window, the male M14x1.5 rod thread, and note this specific SKU ships without a sensor magnet.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The full stroke is 50 mm with a 30 mm adjustment window, giving a usable extend range of 20-50 mm.
The external M12x1.25 threaded stop with lock nut physically limits how far the rod extends, shortening the stroke without altering piston area, so force remains identical to a standard ACQ. It uses fixed elastomer bumpers for deceleration, but because it lacks a rod lock, the cylinder will drift and cannot hold a load if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.