
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X70-20B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 70mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X70-20B is a double-acting, double-rod JIS compact cylinder with an external threaded stop and lock nut that limits the EXTEND end position. You can fine-tune the usable extend travel anywhere between 50 and 70 mm right on the machine without swapping parts. The RETRACT stroke remains unaffected. An external M12x1.25 adjuster screw sets the exact limit.
Because the piston area stays the same, the output force is identical to a standard ACQ of this bore. This 32 mm bore unit features a 16 mm rod, PT1/8 porting, and a male M14x1.5 rod-end thread (-B) that couples directly to your load. It includes fixed NBR elastomer bumpers at both ends for end-of-stroke deceleration and operates at speeds from 30 to 500 mm/s.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X70-20B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 70 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×70 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend position between 50 and 70 mm on a CNC machining fixture to accommodate different raw material lengths without machining custom spacers.
Adjust the extend stroke on the fly during packaging line product changeovers to hit new carton folding depths rapidly and keep downtime minimal.
Iteratively set trial end positions for material compression testing equipment, allowing researchers to find the exact contact depth without recalculating pneumatic travel.
If your process never requires varying the end position, a fixed-stroke ACQ cylinder will suffice. When ordering this adjustable version, confirm the 32 mm bore, 70 mm full stroke, 20 mm adjuster window, the -B male rod thread, and note this unit ships without a magnet (-S) for position sensing.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The usable extend range is 50 to 70 mm, set via a 20 mm adjustment window, while the retract stroke remains fixed.
No, the external M12x1.25 threaded stop only changes the extend stroke length, not the piston area, so force is identical to a standard ACQ. The cylinder uses fixed NBR elastomer bumpers at both ends for deceleration rather than an adjustable air cushion. Note that a plain ACQ-type does not hold its load on air loss; use an external rod lock for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.