
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X70-50B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 70mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X70-50B is a double-acting JIS compact cylinder featuring a 32mm bore and a 70mm full stroke. Equipped with an external M12x1.25 threaded stop and lock nut, it restricts the forward extension travel. You can shift the effective extend span anywhere from 20mm up to the complete 70mm right at the machine, while the retract distance remains untouched.
This unit includes a male M14x1.5 piston rod end for direct load coupling and uses a PT1/8 port. It relies on a fixed NBR elastomer bumper for end-of-stroke deceleration and retains sensor grooves, though this specific SKU ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X70-50B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 70 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×70 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on a CNC milling fixture during part changeovers, tweaking the 20-70mm forward span without machining new spacers.
Modify the flap-folding arm extension on a packaging line to accommodate various box heights, using the external stop to prevent over-travel.
Establish a precise touch-point for a light-duty bending or forming press, testing different end positions safely before locking the nut down.
If your setup never requires altering the forward endpoint, a fixed-stroke ACQ32 version is simpler and sufficient. When ordering, verify the 70mm total travel, the 50mm adjustment window, the male M14x1.5 rod thread, and the absence of a magnet. Note that a plain cylinder drifts if air pressure is lost; utilize an external rod lock for fail-safe load holding.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
It has a 32mm bore, a 70mm full stroke, and a 50mm adjustment window, giving a usable extend range of 20-70mm. The retract stroke is unaffected.
An external M12x1.25 threaded stop with a lock nut mechanically limits how far the rod extends, allowing on-machine tuning without replacing parts. This adjustment alters travel length only, leaving the piston area and force output unchanged. The cylinder uses fixed NBR elastomer bumpers at both ends for deceleration rather than adjustable air cushions, so external shock absorbers are recommended for high-energy loads.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.