
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X75-50SB is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 75mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X75-50SB is a double-acting JIS compact cylinder featuring an external threaded stop with a lock nut that limits the extend stroke. You can fine-tune the extend end position on the machine, yielding a usable extension range of 25-75 mm from the 75 mm full stroke. The retract stroke remains completely unaffected. Because the piston area stays the same, the output force is identical to a standard ACQ of this bore.
It includes a male M14x1.5 piston rod end for direct load coupling, a PT1/8 port, and an M12x1.25 adjuster thread. The body uses fixed elastomer bumpers for end-of-stroke deceleration rather than adjustable air cushions. Equipped with a built-in magnet (-S), the cylinder is fully compatible with reed or electronic solid-state switches.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X75-50SB |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 75 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping extension on milling fixtures to accommodate raw material thickness variations without fabricating custom spacers.
Rapidly reposition the end-of-stroke stop on a carton folding machine when switching between different box formats and product lines.
Iteratively test and set trial end positions for pressing bearings into housings, finding the optimal depth before finalizing the mechanical setup.
If your extend position never changes, a fixed-stroke ACQ cylinder is sufficient. To order, confirm the 32 mm bore, 75 mm full stroke, 50 mm adjuster window, the -S magnet, and the -B male rod thread.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The full stroke is 75 mm, and with the 50 mm adjustment window, the usable extend range is 25-75 mm.
No, the adjuster only limits how far the rod extends, leaving the piston area and force unchanged from a standard ACQ. The retract stroke is unaffected, and fixed elastomer bumpers handle end-of-stroke deceleration. Note that a plain cylinder does not hold its load on air loss, so an external rod lock is needed for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.