
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X80-10S is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 80mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X80-10S is a double-acting JIS compact cylinder featuring an external threaded stop with a lock nut that limits the extend end position. You can fine-tune the usable extend range from 70 mm up to the full 80 mm on the machine, while the retract stroke remains unaffected. It includes a built-in piston magnet (-S) for position sensing.
The unit uses a PT1/8 port, a 16 mm rod, and fixed elastomer bumpers at both ends for end-of-stroke deceleration.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X80-10S |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 80 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping extension between 70 and 80 mm during setup to accommodate varying workpiece thicknesses without machining new stops.
Adjust the extend end position on the fly to match different package heights, ensuring consistent sealing pressure across product changeovers.
Establish trial end positions for pressing bearings, tweaking the external stopper nut to find the perfect insertion depth before finalizing the cycle.
If your extend endpoint never varies, a fixed-stroke ACQ cylinder is sufficient. For the ACQJ32X80-10S, confirm the 80 mm full stroke, the 10 mm adjuster window, the -S magnet, and the default female M8x1.25 rod-end thread.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The usable extend range is 70-80 mm (80 mm full stroke minus a 10 mm window).
An external M12x1.25 threaded stop with a lock nut limits the extend stroke; the retract stroke is unaffected. The adjustment changes the stroke length only, so force remains identical to a standard ACQ. The cylinder uses fixed elastomer bumpers, and the -S magnet works with reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.