Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X80-10SB
The AirTAC Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X80-10SB is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 80mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ32 mm
- Full stroke80 mm
- Port sizePT1/8
- Adjuster threadM12×1.25
About the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X80-10SB
The AirTAC ACQJ32X80-10SB is a double-acting JIS compact cylinder featuring an external threaded stop with a lock nut that limits the extend end position. You get an 80 mm full stroke with a 10 mm adjustment window, allowing you to fine-tune the usable extend range from 70 mm up to 80 mm directly on the machine without swapping parts. The retract stroke remains completely unaffected.
Because the piston area is unchanged, output force is identical to a standard ACQ of this bore, yielding 402.1 N push and 301.6 N pull at 0.5 MPa. This SB configuration includes a male M14x1.5 piston rod end for direct load coupling and a built-in magnet (-S) for position sensing. It uses a PT1/8 port, a Ø16 mm rod, and fixed NBR elastomer bumpers at both ends for end-of-stroke deceleration.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X80-10SB Technical Specifications
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X80-10SB |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 80 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X80-10SB
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X80-10SB Is Used
Machining Fixture Stops
Dial in the extend position from 70 to 80 mm on a CNC machining fixture to accommodate raw part tolerances without fabricating new spacer blocks.
Packaging Changeover
Rapidly adjust the end stop during product format changes on a packaging line, switching carton pusher distances quickly via the external M12x1.25 adjuster.
Assembly Press Trial
Set trial end positions on an automated assembly press to test component seating depth before locking down the final mechanical stroke length.
Is the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X80-10SB the Right Cylinder?
If you need slightly less thrust, the next size down is a bore 20 unit delivering 157.1 N push at 0.5 MPa; for heavier loads, stepping up to a bore 40 cylinder provides 628.3 N push. Choose this 32 mm bore when your application requires approximately 402.1 N push at 0.5 MPa and on-the-fly extend-position tweaking. If the exact 80 mm extend position is permanently fixed and never varies, a standard non-adjustable ACQ cylinder will suffice. When ordering, confirm the 32 mm bore, 80 mm full stroke, 10 mm window, the -S magnet for electronic or reed switches, and the -B male M14x1.5 rod thread.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X80-10SB FAQ
It delivers 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. The full stroke is 80 mm with a 10 mm adjustable window, giving a usable extend range of 70-80 mm. The retract stroke remains fixed at 80 mm.
No, the adjuster only changes the extend stroke length, not the piston area, so force remains identical to a standard ACQ. The cylinder uses fixed NBR elastomer bumpers at both ends for deceleration rather than adjustable air cushions. Additionally, the -S magnet supports both reed and solid-state electronic switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X80-10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.