
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X80-40S is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 80mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ32X80-40S is a double-acting JIS compact cylinder featuring an external threaded stop with a lock nut that limits the extend end position. With an 80mm full stroke and a 40mm adjustment window, the usable extend range runs from 40mm up to 80mm. The retract stroke remains completely unaffected. Because the piston area is unchanged, the output force is identical to a standard ACQ of the same bore.
Operating pressure is 0.15-1.0 MPa with a fixed NBR elastomer bumper at each end for end-of-stroke deceleration. The -S option includes a built-in piston magnet compatible with reed or solid-state electronic switches via the body's sensor grooves. The Ø16mm rod uses an M8x1.25 female thread, and the external adjuster utilizes an M12x1.25 thread.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X80-40S |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 80 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on a CNC machining fixture during setup, allowing rapid accommodation of varying raw part sizes without swapping cylinder hardware.
Rapidly adjust the product push-off end position on a packaging line during format changeovers, using the external M12x1.25 stopper to hit new carton dimensions.
Fine-tune the trial insertion depth on an electronics assembly press, testing multiple engagement positions on the fly before locking the nut for production runs.
A fixed-stroke ACQ is sufficient if your extend end position never needs on-machine tweaking. To order, confirm the 32mm bore, 80mm full stroke, 40mm window, the -S magnet, and the default female rod thread.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The usable extend range is 40-80mm (80mm full stroke minus the 40mm window).
The external M12x1.25 threaded stop with lock nut limits only the extend stroke length, leaving retract unaffected. Force remains unchanged. Deceleration relies on a fixed elastomer bumper, not an adjustable air cushion. A plain cylinder will not hold a load on air loss; use an external rod lock for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.