Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X90-40SB
The AirTAC Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X90-40SB is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 90mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ32 mm
- Full stroke90 mm
- Port sizePT1/8
- Adjuster threadM12×1.25
About the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X90-40SB
The AirTAC ACQJ32X90-40SB is a double-acting JIS compact cylinder with an external threaded stop and lock nut that limits the extend stroke. You get a usable extend range of 50 to 90 mm, while the retract stroke remains unaffected. It includes a male M14x1.5 rod end and a built-in piston magnet.
Because the piston area is unchanged, the output force equals a standard ACQ of this bore. The fixed elastomer bumper decelerates the load at stroke ends, and the M12x1.25 adjuster thread allows on-machine position tuning without swapping parts.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X90-40SB Technical Specifications
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X90-40SB |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 90 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X90-40SB
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X90-40SB Is Used
Machining Fixture Stops
Dial in the exact extend position for varying part lengths on a milling fixture without machining custom spacers.
Assembly Line Changeover
Rapidly reset the extend endpoint within the 50-90 mm window when switching between product variants on an assembly line.
Packaging Pusher Setup
Fine-tune the push distance for cartons of different widths during a packaging line format changeover.
Is the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X90-40SB the Right Cylinder?
This 32 mm bore yields 402.1 N push and 301.6 N pull at 0.5 MPa. Stepping down to a 25 mm bore drops push force to 245.4 N, whereas a 40 mm bore raises push to 628.3 N. If your extend end position never varies, a fixed-stroke ACQ cylinder suffices. For this unit, verify the 90 mm full stroke, the 40 mm adjustment window, the S magnet, and the B male rod thread.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X90-40SB FAQ
This model has a 32 mm bore, a 90 mm full stroke, and a 40 mm adjustment window, giving a usable extend range of 50-90 mm. It delivers 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa.
The external M12x1.25 threaded stop with lock nut limits the extend stroke only, meaning force is identical to a standard ACQ because piston area is unchanged. The cylinder uses fixed elastomer bumpers, not an adjustable air cushion. It will not hold a load on air loss, so add an external rod lock for fail-safe holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X90-40SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.