
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X15-10B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 15mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X15-10B is a double-acting JIS compact cylinder with a male-thread piston rod end (M14x1.5) that couples directly to your load. It features an external threaded stop with a lock nut on the extend side, allowing you to fine-tune the extend end position on the machine without swapping parts. The usable extend range is 5-15mm, shortening the 15mm full stroke by up to 10mm, while the retract stroke remains unaffected.
Because the piston area is unchanged, the force output is identical to a standard ACQ of this bore. The unit uses a PT1/8 port, a Ø16mm rod, and fixed elastomer bumpers at both ends for end-of-stroke deceleration.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X15-10B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 15 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×15 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping extension on a CNC fixture during setup, allowing 5-15mm of travel adjustment to accommodate different raw material thicknesses without machining new stop blocks.
Adjust the stroke of a conveyor sorting gate on the fly when switching between packaged box sizes, ensuring the diverter meets the new physical profile precisely.
Test multiple end positions for a pressing operation on an automated assembly line, tweaking the 5-15mm range to find the optimal engagement depth before finalizing the mechanical stop.
If your extend position never varies, a fixed-stroke ACQ cylinder suffices. For this adjustable version, confirm your ordering essentials: 40mm bore, 15mm full stroke, 10mm window, male rod thread (-B), and whether you need the -S magnet for position sensing.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 5-15mm, utilizing a 10mm adjustment window from the 15mm full stroke.
The external M12x1.25 threaded stop with lock nut limits how far the rod extends, shortening the stroke length only. The force remains identical to a standard ACQ because the piston area is unchanged. The cylinder uses fixed NBR elastomer bumpers at both ends for deceleration, not adjustable air cushions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.