
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X150-10 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 150mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X150-10 is a double-acting JIS compact cylinder built for applications requiring precise extend-position tuning. It features a 150mm stroke and an external threaded stop with a lock nut, allowing you to fine-tune the extend length down by 10mm. This provides a usable extend range of 140 to 150mm, while the retract stroke remains completely unaffected. As a long-stroke made-to-order variant, it exceeds the standard 100mm maximum for this bore.
Because the adjustment only limits travel and not piston area, output force stays identical to a standard ACQ. The body incorporates sensor grooves for reed or solid-state switches, though this specific SKU ships without a magnet. Deceleration relies on a fixed NBR elastomer bumper at each end rather than an adjustable air cushion.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X150-10 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 150 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on varying part heights without machining new spacer blocks.
Adjust the pusher stroke on-site to handle different carton widths during rapid product changeover.
Set trial end positions for pressing bearings to precise depths without swapping the actuator.
If your extend position never varies, a fixed-stroke ACQ cylinder is simpler and more cost-effective. When ordering, confirm the 150mm full stroke, the 10mm window, the female M8x1.25 rod-end thread, and the PT1/8 port. Remember to add the -S magnet option if you need electronic or reed switch detection.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
This model provides a usable extend range of 140-150mm via its 10mm window.
An external M12x1.25 threaded stop with a lock nut limits the extend travel without altering piston area, so force remains unchanged. Fixed elastomer bumpers handle end-of-stroke deceleration. Note that a plain ACQ-type cylinder will drift and cannot hold a load on air loss; use an external rod lock for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.