
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X175-30B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 175mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The ACQJ40X175-30B is a double-acting JIS compact cylinder featuring a 175mm extended stroke and a male M14x1.5 piston rod for direct load coupling. An external M12x1.25 threaded stop and lock nut restricts the extend end position, providing a usable forward travel range of 145 to 175mm. Retract movement remains fixed at the full length. This variant is a made-to-order long-stroke unit, exceeding the standard 100mm maximum for this 40mm bore.
Because the adjuster solely limits travel without altering piston area, output effort matches a standard ACQ. The body incorporates sensor grooves for reed or solid-state switches, though this specific SKU ships without a magnet. Fixed NBR elastomer bumpers absorb end-of-stroke impact, and air connections use a PT1/8 port.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X175-30B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 175 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×175 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on a CNC machining center during setup, allowing operators to shorten the extend stroke by up to 30mm without swapping hardware.
Adapt product pusher end points rapidly on a packaging line when switching carton sizes, relying on the external stop to set the precise 145 to 175mm forward position.
Establish trial end positions for pressing components on an automated assembly line, fine-tuning the contact depth on the fly before finalizing the mechanical setup.
If your application never requires end-position tuning, a fixed-stroke ACQ cylinder suffices. To order this adjustable version, confirm the 40mm bore, 175mm full stroke, 30mm window, male rod thread, and note that a magnet is omitted.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 145 to 175mm, achieved by shortening the 175mm full stroke by up to the 30mm window.
The external M12x1.25 threaded stop with lock nut mechanically limits the extend distance, meaning force remains identical to a standard ACQ because piston area is unchanged. Fixed NBR bumpers decelerate the rod near travel ends, but the cylinder will drift on air loss; use an external rod lock or pilot-operated check valve for fail-safe load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.