
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X30-30 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 30mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X30-30 is a double-acting JIS compact cylinder featuring an external threaded stop with a lock nut that limits the extend stroke. You can fine-tune the rod extension on the machine across a 0 to 30 mm usable range without changing parts, while the retract stroke remains completely unaffected. The adjuster mechanism alters stroke length only, so output force stays identical to a standard ACQ of this 40 mm bore.
Operating pressure spans 0.15 to 1.0 MPa, and the body incorporates fixed elastomer bumpers at each end for end-of-stroke deceleration. This specific configuration ships with a 16 mm piston rod, a PT1/8 port, and a female M8x1.25 rod-end thread. The body retains magnetic-switch grooves for adding sensors later, although this unit does not include a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X30-30 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 30 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×30 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend position within the 0 to 30 mm window when clamping raw castings of varying dimensions on a CNC milling machine.
Quickly alter the push-out depth for different box sizes on a packaging line using the external M12x1.25 stopper nut instead of swapping cylinders.
Test multiple engagement depths for a press-fit pin operation, finding the optimal end point before locking the adjuster nut in place.
A fixed-stroke ACQ cylinder is sufficient if your end position never needs adjustment. When ordering, confirm the 40 mm bore, 30 mm full stroke, 30 mm adjuster window, female rod thread, and that no magnet is required.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The maximum push is 128 kgf at 1.0 MPa. The full stroke is 30 mm with a 30 mm adjustment window, giving a usable extend range of 0 to 30 mm.
No, the external stop limits extension travel only, meaning force is identical to a standard ACQ cylinder. The cylinder uses fixed NBR elastomer bumpers at both ends for deceleration rather than adjustable air cushions. Also, this model lacks a piston magnet, though the body retains sensor grooves for adding reed or solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.