
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X40-10B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 40mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X40-10B is a double-acting JIS compact cylinder featuring an external M12x1.25 threaded stop and lock nut that limits the extend stroke. You can fine-tune the extend end position on the machine without swapping parts, achieving a usable extend range of 30-40 mm. The retract stroke remains completely unaffected by this adjustment.
Because the adjuster only alters travel length and not piston area, output force stays identical to a standard ACQ of the same bore. It includes a male M14x1.5 rod end for direct load coupling, a fixed NBR elastomer bumper at each end, and operates at speeds from 30-500 mm/s.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X40-10B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 40 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the extend position from 30 to 40 mm on a CNC machining fixture to accommodate raw part tolerances without machining new stop blocks.
Quickly reposition the extend end stop on a packaging line when switching between different carton sizes, ensuring precise mechanical ejection.
Test different extend depths during light assembly press setups, relying on the fixed elastomer bumper to absorb end-of-stroke energy.
Selecting this model provides a 128 kgf maximum push at 1.0 MPa. A fixed-stroke ACQ cylinder is sufficient if your end position never varies. When ordering, confirm the 40 mm bore, 40 mm full stroke, 10 mm adjuster window, the male rod thread, and whether you need the -S magnet option for position sensing.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The full stroke is 40 mm with a 10 mm adjustment window, allowing a usable extend range of 30-40 mm.
The M12x1.25 external threaded stop with lock nut limits the extend length without changing the piston area, so force remains identical to a standard ACQ. Fixed NBR bumpers decelerate the rod at travel ends, but this cylinder does not hold the load on air loss; use an external rod lock for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.