
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X40-20 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 40mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X40-20 is a double-acting JIS compact cylinder featuring an external threaded stop with a lock nut on the extend side. This mechanism allows you to fine-tune the extend end position directly on your equipment, providing a usable extend range of 20-40 mm from the 40 mm full stroke, while the retract stroke remains unaffected.
Because the adjustment only limits travel and not piston area, the output force is identical to a standard ACQ of the same bore. The unit includes a fixed NBR elastomer bumper at each end for end-of-stroke deceleration and features integrated sensor grooves, though this specific SKU ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X40-20 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 40 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Adjust the external stop to set new extend positions during packaging line format changes without swapping hardware.
Dial in the exact 20-40 mm extend travel needed for pressing bearings or aligning delicate components on the fly.
Limit the extend stroke to accommodate varying part thicknesses in machining clamps while maintaining full clamping force.
Choose a fixed-stroke ACQ if your extend position never requires field adjustments. When ordering this adjustable version, confirm the 40 mm bore, 40 mm full stroke, 20 mm window, female M8x1.25 rod-end thread, and PT1/8 port. Add the -S suffix if you require a magnet for reed or solid-state switches.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 20-40 mm. The 20 mm window only shortens the extend stroke; it does not change the force.
An external M12x1.25 threaded stop with a lock nut limits the extend travel. The retract stroke is unaffected. Fixed NBR elastomer bumpers decelerate the piston at both ends. Note that a plain ACQ-type does not hold its load on air loss; use an external rod lock or pilot-operated check valve for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.