
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X40-30 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 40mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X40-30 is a double-acting JIS compact cylinder featuring an external threaded stop with a lock nut that limits the extend end position. You get a usable extend range of 10 to 40 mm out of the 40 mm full stroke, while the retract stroke remains unaffected. Because the piston area is unchanged, output force is identical to a standard ACQ of this bore.
Operating pressure is 0.15 to 1.0 MPa. The body incorporates sensor grooves for reed or solid-state switches, though this specific unit ships without a magnet. Deceleration relies on a fixed NBR elastomer bumper at each end rather than an adjustable air cushion.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X40-30 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 40 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on a CNC fixture during setup, allowing 10 to 40 mm of extension to accommodate varying part thicknesses without swapping hardware.
Rapidly readjust the extend end position on a packaging line when switching between different carton sizes, using the external M12x1.25 adjuster to fine-tune the stroke.
Safely test new end-of-stroke locations on assembly equipment, shortening the extend stroke by up to 30 mm to verify tool clearance before finalizing the motion sequence.
Stepping down to a 32 mm bore drops push to 402.1 N, while moving up to a 50 mm bore raises push to 981.8 N. If your machine never needs end-position shifts, a fixed-stroke ACQ suffices. When ordering, confirm the 40 mm bore, 40 mm full stroke, 30 mm adjuster window, female M8x1.25 rod-end thread, and whether you need the S magnet option.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The full stroke is 40 mm with a 30 mm adjustable window, giving a usable extend range of 10 to 40 mm. The retract stroke is unaffected.
An external M12x1.25 threaded stop with a lock nut mechanically limits how far the rod extends, changing only the stroke length, not the piston area, so force remains identical to a standard ACQ. Deceleration is handled by a fixed elastomer bumper at each end, not an adjustable air cushion.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.