
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X45-10 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 45mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X45-10 is a double-acting JIS compact cylinder with an external threaded stop and lock nut that limits the extend end position. You can fine-tune the extend stroke on the machine across a 35-45 mm usable range, while the retract stroke remains completely unaffected.
Because the adjuster only alters travel length and not piston area, output force stays identical to a standard ACQ of this bore. The body features fixed NBR elastomer bumpers at each end for end-of-stroke deceleration.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X45-10 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 45 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the extend position within the 35-45 mm window on CNC machining fixtures to accommodate raw part tolerances without swapping cylinder hardware.
Quickly reposition the extend stop on packaging conveyors during format changes, using the external M12x1.25 adjuster to set new product push distances.
Test trial end positions on automated assembly presses, relying on the fixed elastomer bumper to handle deceleration while finding the optimal contact point.
If you need slightly less push, the 32 mm bore yields 402.1 N at 0.5 MPa, whereas stepping up to the 50 mm bore provides 981.8 N. Choose this 40 mm option when your setup requires precise 35-45 mm extend positioning. A fixed-stroke ACQ cylinder is sufficient if your end stop never varies. Confirm your ordering details: 40 mm bore, 45 mm full stroke, 10 mm window, female M8x1.25 rod thread, and no magnet.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 35-45 mm, created by a 10 mm adjustable window on the 45 mm full stroke.
No, the adjuster only limits how far the rod extends, leaving the retract stroke unaffected. Force remains identical to a standard ACQ because the piston area is unchanged. Deceleration is handled by fixed elastomer bumpers, and this specific model ships without a sensor magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.