
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X45-20S is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 45mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The ACQJ40X45-20S is a double-acting JIS compact cylinder featuring an external threaded stop and lock nut that limits the extend end position. You can fine-tune the forward stroke on the machine across a 25 to 45 mm usable range, shortening the 45 mm full stroke by up to 20 mm without swapping parts. The retract stroke remains completely unaffected.
The 16 mm rod uses an M12x1.25 adjuster thread, and the body relies on fixed NBR elastomer bumpers at each end rather than adjustable air cushions. The integrated -S magnet works seamlessly with both reed and solid-state electronic switches.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X45-20S |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 45 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on a CNC machining center during part changeovers, shortening the extend stroke to accommodate varying raw material widths.
Adjust the folding flap end position on packaging lines for different box depths without replacing the cylinder or altering the retract motion.
Set trial end positions for pressing bearings on automated assembly lines, allowing operators to tweak the 25-45 mm forward travel for delicate components.
Choose this 40 mm model when your setup requires precise forward positioning within the 25-45 mm window. A fixed-stroke ACQ is sufficient if no on-machine end-point adjustment is needed. Confirm your ordering details: 40 mm bore, 45 mm full stroke, 20 mm adjuster window, -S magnet, and female M8x1.25 rod end thread.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 25-45 mm, created by a 20 mm adjustment window on the 45 mm full stroke.
The external M12x1.25 threaded stop with lock nut mechanically limits how far the rod extends, shortening the forward stroke only. It does not alter piston area, so force remains identical to a standard ACQ. Fixed elastomer bumpers decelerate the load at both ends, and the -S magnet supports reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.