
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X50-10 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 50mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X50-10 is a double-acting JIS compact cylinder with a 50mm full stroke and a 10mm external adjustment window. A threaded stop with a lock nut on the rod-end side lets you fine-tune the extend end position on the machine itself, yielding a usable extend range of 40-50mm. The retract stroke remains completely unaffected by this mechanism.
The unit features a 16mm piston rod, a PT1/8 port, and fixed NBR elastomer bumpers at both ends for end-of-stroke deceleration. While this specific model ships without a magnet, the body retains sensor grooves for mounting reed or solid-state switches if needed later.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X50-10 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 50 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend stop on a CNC machining fixture to accommodate raw material thickness variations without swapping out cylinder hardware.
Rapidly reposition the extend end point on packaging lines during format changeovers, using the external M12x1.25 adjuster to set new product widths.
Test and set precise trial end positions on an assembly press, adjusting the 40-50mm stroke window on the fly to perfect pressing depth.
If your extend end position never varies, a fixed-stroke ACQ cylinder is simpler and suffices. To order this adjustable version correctly, confirm the 40mm bore, 50mm full stroke, 10mm window, female rod-end thread (M8x1.25), and whether you require the -S magnet option for switch sensing.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The full stroke is 50mm with a 10mm window, allowing an adjustable extend range of 40-50mm.
No, the external threaded stop alters only the extend stroke length, not the piston area, so force remains identical to a standard ACQ. The cylinder relies on fixed elastomer bumpers for deceleration and does not hold its load on air loss; for fail-safe holding, use an external rod lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.