
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X50-30B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 50mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X50-30B is a double-acting JIS compact cylinder with a 40mm bore and a 50mm full stroke. An external threaded stop with a lock nut limits the extend end position, providing a usable forward range of 20 to 50mm. The retract distance remains completely unaffected. Because the piston area is unchanged, the output force is identical to a standard ACQ of this bore.
This variant features a male-thread piston rod end (M14x1.5) for direct load coupling, a 16mm rod diameter, and a PT1/8 port. It includes fixed elastomer bumpers at both ends for end-of-stroke deceleration rather than adjustable air cushions. The body retains magnetic-switch grooves, though this specific unit ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X50-30B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 50 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend position from 20 to 50mm on a CNC clamping fixture without machining new spacer blocks during product changeovers.
Fine-tune the platen height on packaging equipment to accommodate varying box sizes while relying on the 628.3N extend force.
Set trial end positions on an assembly press, using the fixed elastomer bumper to absorb the 879.6N impact at 0.7MPa.
If the forward end position never needs on-machine tuning, a fixed-stroke ACQ cylinder is sufficient. When ordering, verify the 40mm bore, 50mm full stroke, 30mm adjustment window, the male rod thread, and whether a magnet is needed.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The push force is 628.3N and pull is 527.8N at 0.5MPa, with a max push of 128kgf at 1.0MPa. The full stroke is 50mm with a 30mm adjustment window, giving a usable extend range of 20-50mm. The retract stroke is unaffected.
An external M12x1.25 threaded stop and lock nut mechanically limits the extend distance, changing only the stroke length without altering the piston area or force. The cylinder uses fixed NBR elastomer bumpers at both ends for deceleration rather than adjustable air cushions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.