Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X60-10
The AirTAC Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X60-10 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 60mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ40 mm
- Full stroke60 mm
- Port sizePT1/8
- Adjuster threadM12×1.25
About the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X60-10
The AirTAC ACQJ40X60-10 is a double-acting JIS compact cylinder featuring an external extend stop. An M12x1.25 threaded adjuster with a lock nut lets you set the extend end position within a 50 to 60 mm usable range, while the 60 mm retract stroke remains unaffected.
Because the piston area stays constant, output force equals a standard ACQ of this bore: 628.3 N push and 527.8 N pull at 0.5 MPa. The unit uses a PT1/8 port, a 16 mm rod, and fixed NBR elastomer bumpers for end-of-stroke deceleration rather than adjustable air cushions.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X60-10 Technical Specifications
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X60-10 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 60 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X60-10
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×60 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X60-10 Is Used
Machining Fixture Changes
Adapt clamping depth quickly on a CNC lathe when swapping part families, using the external stop to dial in the exact 50-60 mm extend position.
Carton Flap Folding
Alter the pusher reach on a packaging line to handle varying box heights without swapping out the entire cylinder assembly.
Assembly Press Tria
Test and set the exact pressing distance on automated assembly equipment during initial product run-in, locking the nut once the ideal stroke is found.
Is the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X60-10 the Right Cylinder?
When sizing this 40 mm bore actuator, dropping to a 32 mm bore yields 402.1 N push, whereas stepping up to a 50 mm bore provides 981.8 N at 0.5 MPa. If your extend endpoint never varies, a fixed-stroke ACQ cylinder is simpler. To order, confirm the 40 mm bore, 60 mm full stroke, 10 mm window, female M8x1.25 rod thread, and note this unit lacks the S magnet option.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X60-10 FAQ
It delivers 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. The full stroke is 60 mm, with a 10 mm window giving a usable extend range of 50-60 mm.
The external M12x1.25 threaded stop and lock nut mechanically limit how far the rod extends, shortening the stroke without changing the piston area, so force remains identical to a standard ACQ. The cylinder relies on fixed NBR bumpers for deceleration and will not hold a load if air pressure is lost.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X60-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.