
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X70-10 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 70mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X70-10 is a double-acting JIS compact cylinder with an external threaded stop and lock nut that limits the extend end position. You get a usable extend range of 60-70 mm from the 70 mm full stroke, tunable directly on your machine. The retract stroke remains completely unaffected. An M12x1.25 adjuster thread handles the stroke shortening.
Because the piston area stays the same, output force is identical to a standard ACQ of this bore. You still get the fixed elastomer bumper at each end for end-of-stroke deceleration. This 40 mm bore version uses a PT1/8 port and a Ø16 mm rod. Note this specific SKU ships without a magnet, though the body retains sensor grooves for adding switches if needed later.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X70-10 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 70 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on a CNC machining center during part setups. The 10 mm window lets operators fine-tune the 60-70 mm extension without swapping cylinders.
Adjust end positions rapidly when switching between product variants on an automated assembly line. The external stop allows quick mechanical tweaks for different component heights.
Set precise push distances for packaging equipment folding various carton sizes. The fixed elastomer bumper absorbs the impact while the stop screw sets the final fold depth.
A fixed-stroke ACQ is sufficient if your end position never varies. When ordering, confirm the 70 mm full stroke, the 10 mm adjuster window, the female M8x1.25 rod thread, and the absence of the S magnet option.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 60-70 mm, achieved by shortening the 70 mm full stroke by up to 10 mm via the external stop.
The external M12x1.25 threaded stop with lock nut mechanically limits how far the rod extends, changing only the stroke length and not the piston area. Force remains identical to a standard ACQ. The cylinder uses fixed elastomer bumpers for deceleration rather than adjustable air cushions, and this specific model ships without a sensor magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.