
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X70-75 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 70mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X70-75 is a double-acting JIS compact cylinder featuring an external threaded stop with a lock nut that limits the extend stroke. You can fine-tune the extend end position on the machine without changing parts, achieving a usable extend range of 0-70mm. The retract stroke remains completely unaffected by this adjustment.
Because the piston area stays the same, the output force is identical to a standard ACQ of this bore. This 40mm bore unit uses a PT1/8 port and a Ø16mm piston rod with an M8x1.25 female rod-end thread. It includes a fixed NBR elastomer bumper at each end for end-of-stroke deceleration rather than an adjustable air cushion.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X70-75 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 70 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×70 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Adjust the extend position to accommodate different part lengths on a CNC machining fixture without fabricating new hard stops.
Rapidly reposition the extend end point during product family changeovers on automated assembly lines to minimize downtime.
Dial in the exact extension distance for varying carton sizes on a packaging machine to ensure precise folding and sealing.
If you need less push force, the 32mm bore delivers 402.1N at 0.5MPa, while the 50mm bore provides 981.8N for heavier loads. A fixed-stroke ACQ is sufficient if your end position never requires shifting. When ordering this adjustable version, confirm the 40mm bore, 70mm full stroke, 75mm adjust window, female rod thread, and whether a -S magnet is needed for sensors.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
Push force is 628.3N and pull is 527.8N at 0.5MPa. At 0.7MPa, push is 879.6N, with a maximum push of 128kgf at 1.0MPa. The usable extend range is 0-70mm, shortened from the 70mm full stroke by the 75mm adjuster window.
An external M12x1.25 threaded stop with a lock nut limits the extend distance, changing only the stroke length and not the piston area, so force remains identical to a standard ACQ. The retract stroke is unaffected. Fixed elastomer bumpers decelerate the load at stroke ends, and this unit ships without a sensor magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.