
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X75-20B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 75mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X75-20B is a double-acting JIS compact cylinder featuring an external threaded stop with a lock nut that limits the extend end position. You can fine-tune the extend stroke on the machine without changing parts, yielding a usable extend range of 55-75mm (a 75mm full stroke minus up to the 20mm window). The retract stroke remains completely unaffected.
This unit includes a male M14x1.5 piston rod end for direct load coupling, a fixed NBR elastomer bumper at each end for end-of-stroke deceleration, and sensor grooves on the body. Note that this specific configuration ships without a magnet (-S omitted), so position sensing is not enabled out of the box.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X75-20B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 75 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on a CNC machining fixture during setup, allowing operators to shorten the extend stroke by up to 20mm to accommodate varying part geometries without swapping hardware.
Adjust the end-of-stroke position on packaging line stops during rapid product changeovers, tuning the 75mm stroke down to 55mm to accept different carton sizes on the fly.
Establish optimal trial end positions on a laboratory press, using the external M12x1.25 adjuster to find the precise 55-75mm extension distance before finalizing the mechanical layout.
If your application never requires altering the end position, a fixed-stroke ACQ cylinder is simpler and sufficient. To order this adjustable version correctly, confirm the 40mm bore, 75mm full stroke, 20mm adjustment window, the male M14x1.5 rod thread (-B), and that no magnet is required.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 55-75mm (a 75mm full stroke shortened by up to a 20mm window).
The external M12x1.25 threaded stop with lock nut limits only the extend length, leaving the retract stroke untouched; it changes stroke length but not force. The cylinder uses a fixed NBR elastomer bumper for deceleration, not an adjustable air cushion. A plain ACQ-type does not hold its load on air loss, so for a fail-safe hold you should add an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.