
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X75-20SB is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 75mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X75-20SB is a double-acting JIS compact cylinder with an external threaded stop and lock nut that limits the extend end position. You get a usable extend range of 55-75 mm out of the 75 mm full stroke, as the 20 mm window allows you to shorten the forward travel. The retract stroke remains completely unaffected.
This unit includes a male M14x1.5 rod-end thread for direct load coupling and a built-in piston magnet for electronic or reed switches. It uses a PT1/8 port and fixed elastomer bumpers at both ends.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X75-20SB |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 75 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on machining fixtures when raw part tolerances shift, using the external stop to set the 55-75 mm extend limit without swapping cylinders.
Adapt conveyor diverter arms rapidly during packaging format changes by turning the lock nut to shorten the forward stroke for different carton sizes.
Safely probe trial end positions on new assembly equipment by starting at a shorter extension and gradually increasing the travel up to the full 75 mm limit.
A standard fixed-stroke ACQ is sufficient if your end position never varies. To order this adjustable variant correctly, confirm the 40 mm bore, 75 mm full stroke, 20 mm adjust window, the male rod thread (-B), and the magnet (-S).
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The full stroke is 75 mm with a 20 mm adjustable window, giving a usable extend range of 55-75 mm.
An external M12x1.25 threaded stop with a lock nut mechanically limits the extend distance, meaning the force stays identical to a standard ACQ because the piston area is unchanged. Fixed elastomer bumpers decelerate the load at both ends, and the built-in magnet (-S) works with reed or solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.