Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X75-50S
The AirTAC Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X75-50S is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 75mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ40 mm
- Full stroke75 mm
- Port sizePT1/8
- Adjuster threadM12×1.25
About the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X75-50S
The AirTAC ACQJ40X75-50S is a double-acting JIS compact cylinder with an external threaded stop and lock nut that limits the extend end position. You can fine-tune the extend stroke on the machine across a usable range of 25 to 75 mm, while the retract stroke remains unaffected. Because the piston area stays the same, the output force is identical to a standard ACQ of this bore.
This bore 40 unit features a 16 mm piston rod, a PT1/8 port, and a female M8x1.25 rod-end thread. The external adjuster uses an M12x1.25 thread. It includes a built-in piston magnet for electronic or reed switches and relies on a fixed NBR elastomer bumper at each end for deceleration.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X75-50S Technical Specifications
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X75-50S |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 75 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X75-50S
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X75-50S Is Used
Machining Fixture Stops
Dial in the exact extend position for varying raw material thicknesses on a milling fixture without machining new spacer blocks.
Packaging Changeover
Rapidly reposition the product pusher end point during a carton size format change on a packaging line to minimize downtime.
Assembly Press Trials
Safely test and incrementally adjust insertion depths on an electronics assembly press during new product process validation.
Is the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X75-50S the Right Cylinder?
If your application needs less push force, the bore 32 model provides 402.1 N push at 0.5 MPa, whereas stepping up to the bore 50 version yields 981.8 N push. A standard fixed-stroke ACQ cylinder is sufficient if your end position never varies. To order this adjustable variant correctly, confirm the 40 mm bore, 75 mm full stroke, 50 mm window, the S magnet option, and your required rod thread.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X75-50S FAQ
The push force is 628.3 N and pull is 527.8 N at 0.5 MPa, with a push of 879.6 N at 0.7 MPa and a maximum push of 128 kgf at 1.0 MPa. The full stroke is 75 mm with a 50 mm window, giving a usable extend range of 25 to 75 mm.
No, the external M12x1.25 threaded stop changes the extend stroke length only, leaving the output force unchanged from a standard ACQ. The cylinder uses fixed NBR elastomer bumpers at both ends rather than adjustable air cushions, and the built-in magnet works with reed or solid-state switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X75-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.