
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X80-30 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 80mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X80-30 is a double-acting JIS compact cylinder with an external threaded stop and lock nut that limits the extend end position. You can fine-tune the usable extend stroke from 50 mm up to the full 80 mm directly on the machine without swapping parts. The retract stroke remains a fixed 80 mm and is unaffected by the adjuster.
The 40 mm bore uses a 16 mm rod, PT1/8 port, and an M12x1.25 adjuster thread. It features a fixed NBR elastomer bumper at each end for end-of-stroke deceleration, and the body includes sensor grooves for adding reed or solid-state switches.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X80-30 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 80 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact 50-80 mm clamping reach on machining fixtures to accommodate varying raw material thicknesses without manufacturing new spacer blocks.
Adjust the extend position of package routing stops on a conveyor line in seconds to handle different carton lengths during rapid product changeovers.
Set trial end positions for pressing bearings on an assembly line, allowing operators to tweak the 30 mm window for delicate or varying insertion depths.
If your extend position never varies, a fixed-stroke ACQ cylinder is sufficient. When ordering, confirm the 40 mm bore, 80 mm full stroke, 30 mm adjuster window, female M8x1.25 rod-end thread, and whether a magnet or specific switch is needed.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 50 to 80 mm, representing the 80 mm full stroke minus the 30 mm adjustable window.
An external M12x1.25 threaded stop with a lock nut mechanically limits the extend stroke, changing only the stroke length and not the force. The cylinder uses a fixed NBR elastomer bumper for deceleration, not an adjustable air cushion. It will not hold a load on air loss, so an external rod lock or pilot-operated check valve is required for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.