
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X80-40S is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 80mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X80-40S is a double-acting JIS compact cylinder featuring an external threaded stop with a lock nut on the rod-end side. This mechanism lets you fine-tune the extend end position directly on the machine, providing a usable extend range of 40 to 80 mm from the 80 mm full stroke. The retract stroke remains completely unaffected by this adjustment.
The cylinder uses a 16 mm rod, a PT1/8 port, and fixed NBR elastomer bumpers at both ends for end-of-travel deceleration. Equipped with a piston magnet (-S), it supports both reed and solid-state electronic switches via its integrated grooves.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X80-40S |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 80 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on a CNC milling fixture during part changeovers, using the external M12x1.25 adjuster to hit the new end position without swapping cylinders.
Adapt a pressing station on an automated assembly line for different product heights, shortening the extend stroke by up to 40 mm to accommodate new component dimensions rapidly.
Fine-tune the sealing head extension on a packaging conveyor to match varying carton sizes, relying on the fixed elastomer bumper to absorb the stop impact at high cycle rates.
Choose this ACQJ40X80-40S when your fixture setup or product changeovers require varying extend lengths within the 40 to 80 mm window. If a fixed 80 mm extend position always suffices, a standard non-adjustable ACQ cylinder is the simpler choice. To order, confirm the 40 mm bore, 80 mm full stroke, 40 mm window, the -S magnet option, and the default female M8x1.25 rod-end thread.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 40 to 80 mm, achieved by shortening the 80 mm full stroke by up to a 40 mm window.
No, the external M12x1.25 threaded stop changes only the extend stroke length, not the piston area, so force remains identical to a standard ACQ. The cylinder uses fixed elastomer bumpers for deceleration, and because it is a plain air cylinder, it will not hold a load on air loss; for fail-safe load holding, add an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.