
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X80-50 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 80mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X80-50 is a double-acting JIS compact cylinder featuring an external threaded stop with a lock nut that restricts how far the rod extends. With a full stroke of 80mm and a 50mm adjustment window, you can fine-tune the usable extend range from 30mm up to 80mm directly on the machine. The retract stroke remains completely unaffected by this mechanism. Because the piston area stays the same, output force is identical to a standard ACQ of this bore size.
The unit incorporates fixed elastomer bumpers at both ends for end-of-stroke deceleration rather than adjustable pneumatic cushions. It uses a PT1/8 port and a 16mm rod with a female M8x1.25 rod-end thread. Although this specific configuration ships without a magnet, the body retains integrated sensor grooves for mounting reed or solid-state switches if needed later.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X80-50 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 80 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×80 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Adjust the extend endpoint within the 30-80mm range to accommodate different material thicknesses on a single machining fixture without machining new stop spacers.
Rapidly reconfigure the extend stroke for varying carton sizes on a packaging line by turning the external M12x1.25 adjuster nut to hit the new exact sealing or folding position.
Dial in the precise extend distance during machine commissioning or prototype runs, testing multiple end positions on the fly before locking the nut for production.
Choose this adjustable model specifically when you need on-the-fly end-position changes for varying product dimensions; a fixed-stroke ACQ is sufficient if the extend position never varies. When ordering, verify the 40mm bore, 80mm full stroke, 50mm window, female rod thread, and whether you need the -S magnet option for switch detection.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The usable extend range is 30-80mm (an 80mm full stroke shortened by up to a 50mm window).
An external M12x1.25 threaded stop with a lock nut mechanically limits the extend distance without altering the piston area, so force remains unchanged. The retract stroke is unaffected, and the cylinder relies on fixed elastomer bumpers for deceleration rather than adjustable air cushions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.