
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X90-40 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø40mm bore and 90mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ40X90-40 is a double-acting JIS compact cylinder featuring an external adjustable extend stop. A threaded rod with a lock nut lets you set the extend end position on the machine without swapping parts. With a 40 mm window, the usable extend range is 50-90 mm, while the retract stroke remains completely unaffected.
Because the piston area stays the same, output force is identical to a standard ACQ of this bore. The unit includes a fixed NBR elastomer bumper at each end and integrated sensor grooves, though this specific configuration ships without a magnet. The 16 mm rod uses an M8x1.25 female thread, and the external adjuster features an M12x1.25 thread.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ40X90-40 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Full stroke | 90 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×90 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend position for different part heights on a milling fixture without machining new spacers.
Set precise pressing depths for bearing insertion during product changeovers on an automated assembly line.
Adjust the extend reach to accommodate varying carton sizes on a packaging conveyor without changing cylinder mounts.
If your extend target never varies, a fixed-stroke ACQ cylinder is sufficient. When ordering this adjustable version, confirm the 40 mm bore, 90 mm full stroke, 40 mm window, female rod thread, and whether you need the -S magnet for switch sensing.
AirtacDistr lists every ACQJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj40-adjustable-cylinder
Quick checklist
The full stroke is 90 mm with a 40 mm window, giving a usable extend range of 50-90 mm.
An external M12x1.25 threaded stop with a lock nut limits the extend stroke, allowing on-machine tuning. The adjuster changes stroke length only, so force remains identical to a standard ACQ. The cylinder uses fixed NBR bumpers for deceleration, not adjustable air cushions, and this model ships without a sensor magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.