
The AirTAC ACQJ80-100 Adjustable Compact Cylinder ACQJ80X175-100B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø80mm bore and 175mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The ACQJ80X175-100B is a double-acting JIS compact cylinder featuring an external threaded stop with a lock nut to precisely limit the extend stroke. Because the piston area remains unchanged, the output force is identical to a standard ACQ of this bore. This made-to-order long-stroke variant provides a full 175 mm of travel, exceeding the 100 mm standard maximum for this 80 mm bore size.
By turning the M20x1.5 adjuster screw, you can shorten the forward movement anywhere within a 75 to 175 mm usable range without swapping components. The retract distance stays completely unaffected. Equipped with a male M22x1.5 rod-end thread for direct load coupling, it uses a fixed NBR elastomer bumper at each end for end-of-stroke deceleration rather than an adjustable air cushion.
| Model | Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X175-100B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Full stroke | 175 mm |
| Adjuster thread | M20×1.5 |
| Port size | PT3/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M16×2.0 (F) / M22×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend position within the 75-175 mm window on a CNC machining fixture to accommodate varying raw casting lengths without machining new stop collars.
Rapidly reposition the extend end-stop during a packaging line product changeover, using the external M20x1.5 adjuster to set new carton forming dimensions in seconds.
A fixed-stroke ACQ is sufficient if your end position never needs on-machine tweaking. Confirm your ordering essentials: 80 mm bore, 175 mm full stroke, 100 mm adjuster window, male M22x1.5 rod thread, and PT3/8 porting.
AirtacDistr lists every ACQJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj80-adjustable-cylinder
Quick checklist
The usable extend range is 75 to 175 mm (a 100 mm adjustment window), while the retract stroke remains fixed at 175 mm.
The external M20x1.5 threaded stop with a lock nut mechanically limits how far the rod extends, changing only the stroke length and leaving the piston area and force identical to a standard ACQ. This model relies on a fixed NBR elastomer bumper for end-of-stroke deceleration and ships without a sensor magnet, though the body retains switch grooves for adding reed or solid-state sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.