
The AirTAC ACQJ80-100 Adjustable Compact Cylinder ACQJ80X250-100B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø80mm bore and 250mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The AirTAC ACQJ80X250-100B is a double-acting JIS compact cylinder featuring a 250mm stroke and an external M20x1.5 threaded stop with a lock nut. This mechanism allows you to fine-tune the extend end position on the machine itself, yielding a usable extend range of 150-250mm. The retract stroke remains completely unaffected by this adjustment. Because the piston area stays constant, output force is identical to a standard ACQ of the same bore.
This long-stroke made-to-order variant exceeds the standard 100mm maximum for an 80mm bore, reaching up to 300mm. The unit incorporates fixed NBR elastomer bumpers at both ends for end-of-stroke deceleration rather than adjustable air cushions. It includes a male M22x1.5 rod-end thread for direct load coupling and PT3/8 ports. Note that a plain ACQ-type cylinder will drift and cannot hold a load on air loss, requiring an external rod lock for fail-safe positioning.
| Model | Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X250-100B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Full stroke | 250 mm |
| Adjuster thread | M20×1.5 |
| Port size | PT3/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M16×2.0 (F) / M22×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×250 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping depth on machining centers during setup or tooling changes without machining new spacer blocks.
Adjust the diverting stroke length on packaging lines on the fly to accommodate varying carton widths during product changeover.
Establish trial end positions for pressing operations in automated assembly cells, allowing precise tuning before finalizing the movement.
If exact end-position tuning is unnecessary, a fixed-stroke ACQ cylinder will suffice. When ordering, confirm the 80mm bore, 250mm full stroke, 100mm window, the male M22x1.5 rod thread (-B), and note the absence of a magnet.
AirtacDistr lists every ACQJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj80-adjustable-cylinder
Quick checklist
The full stroke is 250mm with a 100mm window, allowing a usable extend range of 150-250mm.
The external M20x1.5 threaded stop with lock nut limits the extend length without altering piston area, meaning force remains identical to a standard ACQ. The cylinder uses fixed NBR elastomer bumpers at both ends instead of adjustable air cushions, and because it lacks a -S magnet, it ships without a sensor magnet despite having body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.