Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-10B
The AirTAC Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-10B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø80mm bore and 60mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ80 mm
- Full stroke60 mm
- Port sizePT3/8
- Adjuster threadM20×1.5
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-10B
The AirTAC ACQJ80X60-10B is a double-acting JIS compact cylinder with an external extend stop. A threaded M20x1.5 rod-end screw and lock nut let you shorten the forward travel, yielding a usable extend range of 50 up to 60 mm. The return stroke remains fixed at the full 60 mm.
Because the piston area is untouched, output force equals a standard ACQ of the same bore: 2513.2 N push and 2267.8 N pull at 0.5 MPa. The unit features a 25 mm rod, PT3/8 port, and a fixed NBR elastomer bumper at each end. This variant includes a male M22x1.5 rod thread (-B) for direct load coupling and ships without a magnet.
Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-10B Technical Specifications
| Model | Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-10B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Full stroke | 60 mm |
| Adjuster thread | M20×1.5 |
| Port size | PT3/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M16×2.0 (F) / M22×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-10B
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-10B Is Used
Machining Fixture Changeover
Adapts clamp extend positions instantly on a machining center when swapping part families, using the stopper to dial in the exact 50-60 mm reach.
Package Diverter Setup
Tunes the pusher arm extension on a packaging conveyor to handle varying carton depths without replacing the cylinder or mounting hardware.
Press Positioning
Establishes trial end positions on an assembly press, letting operators fine-tune the forming depth on the fly via the external lock nut.
Is the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-10B the Right Cylinder?
Selecting this 80 mm bore provides 2513.2 N push at 0.5 MPa. Stepping down to a 63 mm bore yields 1558.6 N push, while a 100 mm bore offers 3927.0 N. Choose this adjustable model when setups require varying extend end positions; if a fixed 60 mm stroke is always sufficient, a standard ACQ cylinder is simpler. Confirm the 80 mm bore, 60 mm full stroke, 10 mm window, male rod thread, and magnet omission when ordering.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-10B FAQ
It delivers 2513.2 N push and 2267.8 N pull at 0.5 MPa, 3518.5 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. The usable extend range is 50 to 60 mm, created by a 10 mm adjustment window on a 60 mm full stroke.
The external M20x1.5 threaded stop with lock nut limits only the forward stroke length; it does not change piston area, so force is identical to a standard ACQ. The cylinder uses fixed elastomer bumpers for end-of-stroke deceleration. It will not hold the load on air loss, so use an external rod lock for fail-safe positioning.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.