Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-20
The AirTAC Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-20 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø80mm bore and 60mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ80 mm
- Full stroke60 mm
- Port sizePT3/8
- Adjuster threadM20×1.5
About the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-20
The AirTAC ACQJ80X60-20 is a double-acting JIS compact cylinder with an external extend stop, letting you dial in the stroke length right on the machine. A 20mm adjustment window shortens the outward travel from a 60mm full stroke, yielding a usable extend range of 40-60mm. The return stroke remains completely unaffected.
Because the piston area stays constant, output force is identical to a standard ACQ of this bore, delivering 2513.2N of push at 0.5MPa. The 25mm rod uses an M20x1.5 adjuster thread, and end-of-travel deceleration relies on a fixed NBR elastomer bumper rather than a pneumatic cushion.
Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-20 Technical Specifications
| Model | Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-20 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Full stroke | 60 mm |
| Adjuster thread | M20×1.5 |
| Port size | PT3/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M16×2.0 (F) / M22×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-20
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-20 Is Used
Machining Fixture Stops
Dial in the exact 40-60mm extend position during a product-changeover on a milling line, accommodating raw material thickness variations without swapping cylinder bodies.
Transfer Line Diverter
Set a precise push-off distance for varying package widths on a conveyor, using the external stop to prevent over-travel into the main belt structure.
Press Sub-Assembly
Establish trial end positions for a sub-assembly press operation, tweaking the outward reach on the fly until the optimal staking depth is achieved.
Is the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-20 the Right Cylinder?
At 0.5MPa this 80mm bore generates 2513.2N push and 2267.8N pull. Stepping down to a 63mm bore drops push to 1558.6N, while a 100mm bore raises it to 3927.0N. If your application never requires end-position tuning, a fixed-stroke ACQ cylinder will suffice. When ordering, verify the 60mm full stroke, the 20mm window, the PT3/8 port, and the female M16x2.0 rod end.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-20 FAQ
This model delivers 2513.2N push and 2267.8N pull at 0.5MPa, 3518.5N push at 0.7MPa, and a maximum push of 513kgf at 1.0MPa. The full stroke is 60mm with a 20mm window, allowing the extend stroke to be adjusted down to 40mm.
The external M20x1.5 threaded stop with lock nut only limits the extend length; it does not alter piston area, so force remains identical to a standard ACQ. Deceleration is handled by a fixed elastomer bumper. A plain ACQ-type does not hold its load on air loss, so an external rod lock or pilot-operated check valve is required for fail-safe holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.