Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-40S
The AirTAC Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-40S is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø80mm bore and 60mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ80 mm
- Full stroke60 mm
- Port sizePT3/8
- Adjuster threadM20×1.5
About the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-40S
The AirTAC ACQJ80X60-40S is a double-acting JIS compact cylinder featuring an external extend stop. A threaded adjuster with a lock nut lets you fine-tune the outward end position on the machine, yielding a usable extend range of 20 to 60 mm from the 60 mm full stroke. The return stroke remains fixed and unaffected.
Because the piston area is unchanged, output force equals a standard ACQ of this bore: 2513.2 N push and 2267.8 N pull at 0.5 MPa. The unit integrates a fixed NBR elastomer bumper at each end and includes a built-in piston magnet for reed or solid-state sensing.
Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-40S Technical Specifications
| Model | Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-40S |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Full stroke | 60 mm |
| Adjuster thread | M20×1.5 |
| Port size | PT3/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M16×2.0 (F) / M22×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-40S
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-40S Is Used
Machining Fixture Stops
Dial in the exact 20 to 60 mm extend position on a CNC lathe bar puller to accommodate different raw material lengths without machining custom spacers.
Product Changeover Guides
Swiftly reposition a packaging line's end-of-stroke flap folder by turning the M20x1.5 adjuster thread instead of swapping out mechanical hardstops.
Assembly Press Tuning
Iteratively test engagement depth on an electronic component insertion press by trimming the outward stroke in fine increments until the pin seats correctly.
Is the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-40S the Right Cylinder?
For lower push requirements, the 63 mm bore delivers 1558.6 N at 0.5 MPa, whereas the 100 mm bore provides 3927.0 N for heavier loads. If the exact 60 mm extend position never varies, a fixed ACQ cylinder suffices. When ordering this adjustable unit, verify the 80 mm bore, 60 mm full stroke, 40 mm window, female M16x2.0 rod thread, and the -S magnet option.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-40S FAQ
At 0.5 MPa it delivers 2513.2 N push and 2267.8 N pull; at 0.7 MPa push is 3518.5 N; max push is 513 kgf at 1.0 MPa. The full stroke is 60 mm with a 40 mm window, giving a usable extend range of 20-60 mm. The port is PT3/8, female rod-end thread is M16x2.0, and the external adjuster thread is M20x1.5.
No, the adjuster only changes the extend stroke length, leaving force identical to a standard ACQ. The rod end uses a fixed NBR elastomer bumper for end-of-stroke deceleration, not an adjustable air cushion or brake. Note that this cylinder will drift and not hold a load on air loss; use an external rod lock for fail-safe holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X60-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.