Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X75-75
The AirTAC Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X75-75 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø80mm bore and 75mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ80 mm
- Full stroke75 mm
- Port sizePT3/8
- Adjuster threadM20×1.5
About the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X75-75
The AirTAC ACQJ80X75-75 is a double-acting JIS compact cylinder with a full 75mm stroke and an external threaded stop that limits extension. By turning the M20x1.5 adjuster rod with its lock nut, you can shorten the extend end position on the machine without swapping parts. The usable extend range is 0-75mm, while the retract stroke remains unaffected.
Because the piston area is unchanged, output force is identical to a standard ACQ of this bore. At 0.5 MPa, it pushes 2513.2N and pulls 2267.8N. The unit uses a fixed NBR elastomer bumper at each end for deceleration and operates at speeds from 30 to 500 mm/s. This model ships without a magnet, though the body retains sensor grooves for future upgrades.
Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X75-75 Technical Specifications
| Model | Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X75-75 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Full stroke | 75 mm |
| Adjuster thread | M20×1.5 |
| Port size | PT3/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M16×2.0 (F) / M22×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X75-75
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X75-75 Is Used
Automotive Welding Stops
Tune the extend end position on the fly during robotic welding fixture changeovers without machining new spacer collars.
Variable Carton Sealing
Adjust the extend stroke rapidly when switching between different box sizes on a packaging line to maintain precise flap contact.
Machining Center Clamps
Dial in trial end positions for workholding clamps on machining centers to accommodate varying raw material thicknesses.
Is the Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X75-75 the Right Cylinder?
For tasks needing less thrust, the 63mm bore yields 1558.6N push at 0.5 MPa; if your application requires more power, the 100mm bore provides 3927.0N push. If your extend position never varies, a fixed-stroke ACQ80 cylinder is simpler and sufficient. When ordering this adjustable unit, confirm the 80mm bore, 75mm full stroke, 75mm window, female rod thread M16x2.0, and PT3/8 porting.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X75-75 FAQ
At 0.5 MPa, the push force is 2513.2N and the pull force is 2267.8N. At 0.7 MPa, the push force is 3518.5N, with a maximum push of 513 kgf at 1.0 MPa. The usable extend range is 0-75mm (full 75mm stroke minus a 75mm window), while the retract stroke is unaffected.
The external M20x1.5 threaded stop with lock nut limits how far the rod extends, allowing on-machine stroke tuning without changing the piston area. The force remains identical to a standard ACQ. The cylinder uses fixed NBR elastomer bumpers at each end for deceleration, and this specific model ships without a sensor magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ80-100 Adjustable Compact Cylinder ACQJ80X75-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.